Bench Vises - Page 4 - Blowout Sale! Save up to 60%


Blowout Sale! Up to 60% off on Bench Vises at UCBC Group, Page 4. Top brands include Exact Tooling, AccuJaws, Yost Tools, USST, BEESS, HFS, HHIP, & POWERTEC. Hurry! Limited time offers. Offers valid only while supplies last.



PH Part#: 6251AF Ð Aluminum Soft Jaws for 5"-10" Chuck - 1/16"x90 - (4.375 L x 1.500 W x 2.500 H) Groove Width: 0.551 (14mm)/Screw Size: 3/8/Hole Space: 0.875 (22mm)/Hole to Front: 2.125
By Exact Tooling
In Stock
$86.18

mpn: PH-6251AF, ean: 0689557266215,

4.4 out of 5 stars with 113 reviews
PH Part#: 6251AF Ð Aluminum Soft Jaws for 5''-10'' Chuck - 1/16''x90 - (4.375 L x 1.500 W x 2.500 H) Groove Width: 0.551 (14mm) / Screw Size: 3/8 / Hole Space: 0.875 (22mm) / Hole to Front: 2.125.


AccuJaws RB210-2A-12 3 Piece Round Aluminum Chuck Soft Jaws Set for Kitagawa Type with 1.5mm x 60 Degrees Serrations, 10" Diameter x 2" Height, 12" Pie Diameter
By AccuJaws
In Stock
$220.42

mpn: RB210-2A-12,

4.5 out of 5 stars with 37 reviews
AccuJaws 3 piece round aluminum chuck soft jaws set for Kitagawa type 1.5-millimeters by 60 degrees serration. Measures 10-inches diameter by 2-inches height. 12-inches pie diameter.3 piece round aluminum chuck soft jaws set. Use for Kitagawa type 1.5-millimeters by 60 degrees serration. Measures 10-inches diameter by 2-inches height. 12-inches pie diameter.


TG#: 6253AP Ð Aluminum Tongue & Groove Soft Jaws for 6" Chuck - (3.200 L x 1.000 W x 2.500 H) - GrooveWidth: 0.313/TongueWidth: 0.500/ScrewSize: 3/8"/HoleSpace: 1.500/Tongue to Front: 1.350
By Exact Tooling
In Stock
$85.00

mpn: TG-6253AP, ean: 0689557270243,

4.6 out of 5 stars with 104 reviews
TG#: 6253AP Ð Aluminum Tongue & Groove Soft Jaws for 6'' Chuck - (3.200 L x 1.000 W x 2.500 H) - GrooveWidth: 0.313 / TongueWidth: 0.500 / ScrewSize: 3/8'' / HoleSpace: 1.500 / Tongue to Front: 1.350.


Yost Vises MA-350 5 Magnetic Aluminum Vise Jaw Caps (1 Pair)
By Yost Tools
In Stock
$35.02
$34.97

mpn: MA-350, ean: 0737278138226,

4.7 out of 5 stars with 70 reviews
The Yost Vises MA-350 5'' magnetic aluminum vise jaw caps attach to and cover a set of 5''-wide serrated vise jaws to shield delicate work from damage. The caps are made of aluminum for durability and have a smooth grooved surface that provides enhanced grip while preventing the clamped item from being marred. The magnetic backing runs the full length of the cap to securely bond it to the front of the vise jaw. Two jaw caps are included.Yost Vises manufactures a wide range of vises, including


USST KT-10300AP Alum T6061 Pointed Soft Chuck Jaws for 10" CNC Lathe Chucks, 3" Tall (Set of 3 Pieces)
By USST
In Stock
$59.70

mpn: KT-10300AP,

4.2 out of 5 stars with 97 reviews
Set of 3 pcs Alum Pointed (6061) Machinable Soft Chuck Jaws- Pointed-3 Inch TALL For 10'' CNC Chucks - Kitagawa B10, B210; Samchully HS10, HC10; MMK-LMC-Matsumoto PC10, ZA_-10.1.5mm x 60 Degree serrations. Aluminum 6061 T6. 2 Holes. Supplies maximum concentricity on finish turning operations. If Jaws are Taller than standard height for your Chuck - there is a loss of Grip force - Reduce RPM during all operations; Check your Chuck Manual to figure standards for your Chuck and Grip Force


SM Part#: 6150AP Ð Aluminum Soft Jaws for 5"-6" Chuck - 1/16"x90 - (3.250 L x 1.250 W x 1.500 H) Groove Width: 0.551 (14mm)/Screw Size: 3/8/Hole Space: 0.984 (25mm)/Hole to Front: 1.650
By Exact Tooling
In Stock
$67.14

mpn: SM-6150AP, ean: 0689557267021,

4.3 out of 5 stars with 117 reviews
SM Part#: 6150AP Ð Aluminum Soft Jaws for 5''-6'' Chuck - 1/16''x90 - (3.250 L x 1.250 W x 1.500 H) Groove Width: 0.551 (14mm) / Screw Size: 3/8 / Hole Space: 0.984 (25mm) / Hole to Front: 1.650.


Aluminum Alloy Cabinet Hardware Drawer Pull Jig Wood Drilling Dowel Hole Jig Set
By BEESS
In Stock
$31.50

mpn: 16100385b, ean: 0682838388781,

4.6 out of 5 stars with 137 reviews
Description:Brand New and High Quality. Features:* This Cabinet Hardware Jig is made of high quality Stainless Steel and Aluminum Alloy, high strength and hardness, very durable in use. High corrosion resistance and not easy to rust.* This Cabinet Hardware Jig helps you measure out the perfect hole positions for cabinet handles, pulls, and knobs.* This Cabinet Hardware Jig is for precise installation of Pulls/Knobs on drawers and doors, the L-bracket and top screws keep it dialed in


TG#: 6250AP Ð Aluminum Tongue & Groove Soft Jaws for 6" Chuck - (2.750 L x 1.000 W x 2.500 H) - GrooveWidth: 0.313/TongueWidth: 0.500/ScrewSize: 3/8"/HoleSpace: 1.500/Tongue to Front: 1.360
By Exact Tooling
In Stock
$84.56

mpn: TG-6250AP, ean: 0689557270281,

4.8 out of 5 stars with 53 reviews
TG#: 6250AP Ð Aluminum Tongue & Groove Soft Jaws for 6'' Chuck - (2.750 L x 1.000 W x 2.500 H) - GrooveWidth: 0.313 / TongueWidth: 0.500 / ScrewSize: 3/8'' / HoleSpace: 1.500 / Tongue to Front: 1.360.


USST RKT-12208A Aluminum 6061 T6, Round Chuck Jaws for B212, 12" CNC Lathe Chucks, 2" Tall (Set of 3 Pieces)
By USST
In Stock
$169.18

mpn: RKT-12208A,

4.9 out of 5 stars with 43 reviews
Set of 3 pcs soft Round Jaws - Aluminum 6061 T6 - For 12'' CNC Chucks - Kitagawa B212,BB212; Samchully HS12,MH212,HH212.1.5mm x 60 Degree serrations. Aluminum 6061 T6. 2 Holes. Use for holding thin walled parts to prevent shape distortion - Supplies maximum concentricity on finish turning operations. If Jaws are Taller than standard height and/or oversized dia- there is a loss of Grip force - Reduce RPM during all operations; Check your Chuck Manual to figure standards for your Chuck and Grip


HFS (R) 4" Non-Swivel Milling Lockdown Vise
By HFS
In Stock
$91.99

mpn: 1, ean: 0819300016174,

4.9 out of 5 stars with 121 reviews
1. Use highest quality ductile Iron 80000 PSI for minimum bending. 2. The enclosed lead screw and sliding surface are harden and ground. 3. Highest clamping power. It's very accurate and durable. 4. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates. 5. Four setting positions of the jaw


HHIP 3900-2120 Aluminum Vise Work Stop, 7/8" Capacity
By HHIP
In Stock
$5.30

mpn: 3900-2120, ean: 0769053021553,

4.4 out of 5 stars with 64 reviews
Vise Work Stop 7/8 Capacity. To fit angle lock type vises. Single thumb screw tightens clamp to vise jaw. Two ground pins on both sides of clamp. Easily mounts to the top of most vise jaws. 7/8'' capacity.To fit AngLock type milling vises. Easily mounts to the top of most vise jaws. 7/8'' capacity. Single thumb screw tightens clamp to vise jaw. Two ground pins on both sides of clamp.


PH Part#: 6201AF Ð Aluminum Soft Jaws for 5"-10" Chuck - 1/16"x90 - (4.375 L x 1.500 W x 2.000 H) Groove Width: 0.551 (14mm)/Screw Size: 3/8/Hole Space: 0.875 (22mm)/Hole to Front: 2.125
By Exact Tooling
In Stock
$88.03

mpn: PH-6201AF, ean: 0689557266253,

4.6 out of 5 stars with 106 reviews
PH Part#: 6201AF Ð Aluminum Soft Jaws for 5''-10'' Chuck - 1/16''x90 - (4.375 L x 1.500 W x 2.000 H) Groove Width: 0.551 (14mm) / Screw Size: 3/8 / Hole Space: 0.875 (22mm) / Hole to Front: 2.125.


PH Part#: 8200AP Ð Aluminum Soft Jaws for 8" Chuck - 1/16"x90 - (4.375 L x 1.500 W x 2.000 H) Groove Width: 0.669 (17mm)/Screw Size: 1/2/Hole Space: 0.875 (22mm)/Hole to Front: 2.125
By Exact Tooling
In Stock
$91.62

mpn: PH-8200AP, ean: 0689557267106,

4.4 out of 5 stars with 32 reviews
PH Part#: 8200AP Ð Aluminum Soft Jaws for 8'' Chuck - 1/16''x90 - (4.375 L x 1.500 W x 2.000 H) Groove Width: 0.669 (17mm) / Screw Size: 1/2 / Hole Space: 0.875 (22mm) / Hole to Front: 2.125.


TG#: 6151AF Ð Aluminum Tongue & Groove Soft Jaws for 6" Chuck - (3.000 L x 1.000 W x 1.500 H) - GrooveWidth: 0.313/TongueWidth: 0.500/ScrewSize: 3/8"/HoleSpace: 1.500/Tongue to Front: 1.610
By Exact Tooling
In Stock
$55.92

mpn: TG-6151AF, ean: 0689557269940,

4.2 out of 5 stars with 8 reviews
TG#: 6151AF Ð Aluminum Tongue & Groove Soft Jaws for 6'' Chuck - (3.000 L x 1.000 W x 1.500 H) - GrooveWidth: 0.313 / TongueWidth: 0.500 / ScrewSize: 3/8'' / HoleSpace: 1.500 / Tongue to Front: 1.610.


POWERTEC R71044 DuBois Aluminum Drill Press Vise
By POWERTEC
In Stock
$32.56
$12.99
You Save: 60%

mpn: R71044, ean: 0709619853341,

4.3 out of 5 stars with 142 reviews
Dubois aluminum drill Press vise provides stability for drilling applications. The vise is made of cast aluminum. It measures 9-1/8 inches long by 4-1/2 inches wide. Max. Jaw opening is 2-3/4 inches (70mm). quick-release for instant clamping and release of work piece. Slots make it easy to mount to drill Press tables; compatible with most drill stands. Built-in Groove holds dowels and other round materials.Provides stability for drilling applications; compatible with most drill tables. Made of


TG#: 6252AF Ð Aluminum Tongue & Groove Soft Jaws for 6" Chuck - (3.250 L x 1.500 W x 2.500 H) - GrooveWidth: 0.313/TongueWidth: 0.500/ScrewSize: 3/8"/HoleSpace: 1.500/Tongue to Front: 1.690
By Exact Tooling
In Stock
$82.07

mpn: TG-6252AF, ean: 0689557269841,

4.6 out of 5 stars with 40 reviews
TG#: 6252AF Ð Aluminum Tongue & Groove Soft Jaws for 6'' Chuck - (3.250 L x 1.500 W x 2.500 H) - GrooveWidth: 0.313 / TongueWidth: 0.500 / ScrewSize: 3/8'' / HoleSpace: 1.500 / Tongue to Front: 1.690.


Yost Vises MP-345 4-1/2" Aluminum Prism Vise Jaw Cover
By Yost Tools
In Stock
$44.43

mpn: MP-345, ean: 0737278138431,

4.8 out of 5 stars with 19 reviews
The Yost Vises MP-345 4-1/2'' magnetic aluminum prism vise caps attach to and cover a set of 4-1/2''-wide serrated vise jaws to shield delicate work from damage and enable clamping of pipe for cutting, drilling, and tapping. The caps are made of aluminum for durability. They have a prism pattern made from one vertical groove, three horizontal grooves, and one center punch groove to enhance grip of pipe and delicate items and to prevent marring. The magnetic backing runs the full length of the


TG#: 6203AF Ð Aluminum Tongue & Groove Soft Jaws for 6" Chuck - (3.200 L x 1.000 W x 2.000 H) - GrooveWidth: 0.313/TongueWidth: 0.500/ScrewSize: 3/8"/HoleSpace: 1.500/Tongue to Front: 1.350
By Exact Tooling
In Stock
$76.05

mpn: TG-6203AF, ean: 0689557269902,

4.5 out of 5 stars with 21 reviews
TG#: 6203AF Ð Aluminum Tongue & Groove Soft Jaws for 6'' Chuck - (3.200 L x 1.000 W x 2.000 H) - GrooveWidth: 0.313 / TongueWidth: 0.500 / ScrewSize: 3/8'' / HoleSpace: 1.500 / Tongue to Front: 1.350.


AccuJaws RB206-2A 3 Piece Round Aluminum Chuck Soft Jaws Set for Kitagawa Type with 1.5mm x 60 Degrees Serrations, 6" Diameter x 2" Height
By AccuJaws
In Stock
$88.78

mpn: RB206-2A,

4.7 out of 5 stars with 46 reviews
AccuJaws 3 piece round aluminum chuck soft jaws set for Kitagawa type 1.5-millimeters by 60 degrees serration. Measures 6-inches diameter by 2-inches height.3 piece round aluminum chuck soft jaws set. Use for Kitagawa type 1.5-millimeters by 60 degrees serration. Measures 6-inches diameter by 2-inches height.


HHIP 3900-2195 Quick-Lok Aluminum Vise Jaws, 6" Length x 3" Height x 2" Width
By HHIP
In Stock
$106.32

mpn: 3900-2195, ean: 0769053021898,

4.7 out of 5 stars with 17 reviews
Quick-Lock Aluminum Vise Jaws (6L X 3H X 2W).Set of 2; Made in USA. Fits Kurt AnglockTM & similar precision milling machine vises. Easy and quick set-ups. Machinable vise jaws for drill or mill features.



Viewing Page 4 of 5

View more products in Hand Tools.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - ucbcgroup.org. All Rights Reserved.